The images above are examples of the components ZyCoat coating serivces will coat.

8 - Cylinder Engine Components

  • ZyCoat, LLC will coat your manifold, headers, exhaust, turbo and intake components with ZyBar high temperature heat dissipation coating.
  • Follow selection instructions below.

Customer is responsible for disassembly of turbo. Ship only turbo housing to ZyCoat, LLC.

Customer is responsible for disassembly of turbo. Ship only turbo housing air intake to ZyCoat, LLC

Select your ZyBar Color by clicking option below.

 

 

Contact us for a price

Features and Benefits

Charges above include receiving inspection, handling, ZyBar coating inside & out, media blasting, coating application, cure and post cure quality inspection. Custom produced or custom competition headers may require charge over and above the item charges listed above. The additional charge should not exceed $100.00 per pair which will be determined during receipt inspection by ZyCoat, LLC. Collectors, fittings, small parts less than 6" in length provided with any of the above components will be charged at $20.00 per item and added to invoice. ZyCoat, LLC’s goal is to ship your coated parts back to you no more than 15 days from the date we receive and inspect your parts.

Note: parts received with prior high temperature coating, scaling, rust or holes/cracks will incur additional preparation, handling charges.
Payment for all additional charge items is required prior to return shipment of the coated components.
Payment in full is required for all services including return shipping prior to ZyCoat, LLC release of parts to shipping service.

Shipping Notes

Initial Shipping: Customer is responsible for shipping all engine components or parts to ZyCoat for all coating services.
Ship your components to;
ZyCoat, LLC World Headquarters
15032 W. 117th Street
Olathe, Kansas 66062 USA

The shipper is responsible for all parts received at ZyCoat, LLC damaged, dented or scratched. ZyCoat, LLC will make every reasonable effort to note this damage on the carriers bill of lading. The customer is responsible for filing of all carrier claims related to parts shipped to or from ZyCoat, LLC.

Return Shipping: Return shipping cost are based on size, weight and destination of the package and cannot be calculated until the order is complete, boxed up and ready to return. A ZyCoat customer service rep will contact you as the coating service you ordered is nearing completion to arrange return shipping. ZyCoat uses UPS to return ship parts. Parts are shipped via UPS ground unless the customer request expedited UPS shipping. If you want the package to be insured, please tell us the desired insurance amount for your shipment at the time of our call.

Coating Services Terms

Pricing provided is based on receipt of headers in good & reasonable condition. Used parts can be coated, however previously coated parts will require additional handling and processing such as stripping paint, rust removal, additional surface prep due to previous coating material. Headers with separate primaries or with detachable/separate collectors will incur upcharge. Components with excessive rust or thinning may require machining.

Part (s) condition should be assessed prior to shipping the components to ZyCoat, LLC. Should we receive parts in this condition or should pin-holes occur during media blasting additional metal work charges may be incurred. These charges must be authorized and paid prior to ZyCoat, LLC returning the components. This will be determined upon receipt and audit of the components. Additional days will be required to process the components.

No work will be done on such parts until we receive authorization and additional funds if any. We will media blast both the interior and exterior of components. If you have any restrictions on where the coating will be applied or “masking required” it is critical that you spell this out in writing with the component parts you provide. Given the nature of automotive parts there is significant variation in size, geometry and complexity of parts.

ZyCoat, LLC will not be responsible for disassembly or reassembly of any components.

We will make every attempt to keep deviations from amounts charged to a minimum. No added work will be initiated until we receive written authorization to proceed from you. Stripping paint, rust or performing additional surface/media blasting may require additional charges.